Furnace Repair San Ramon
Hi there, I’m Pat, your local furnace repair and heating system maintenance expert serving San Ramon, California. If you're experiencing issues with your furnace—such as strange noises or inconsistent heating—I'm available for service calls 24/7.
In an emergency, I'll prioritize getting to your home the same day or night to restore your heating system quickly. Don't hesitate to call me at (925) 884-0209.
You can rely on me for friendly, responsive, reasonably priced furnace and heating system repairs. I'll thoroughly diagnose the problem and guide you through the most cost-effective options.
I can assist with minor furnace repairs over the phone, potentially saving you the cost of a service call. It could be as simple as a thermostat reset or relighting a pilot light to help you avoid the cost of a house visit. I am committed to serving our San Ramon customers as easily and affordably as possible, whether answering questions, providing remote video calls, or delivering in-person service. Let us know what works best for your needs!
Hear it Directly from Our Customers
'So get this, I found this A/C Repair company in San Ramon that deserves more than 5 stars - they're that good! Pat is the man, lemme tell ya....'
Visit our testimonials page to read the full review
Real Feedback, Real Results
'AC Repair San Ramon did a fantastic job installing a new furnace, and new ducting in our home in San Ramon. We were extremely impressed with Pat...'
Read the full review.
Pat is examining a furnace in San Ramon to assess the repair costs.
A regular morning staff meeting to discuss scheduled service calls.
At AC Repair San Ramon, our prices are unbeatable for heating system repair service calls and repair costs. I assure you that we will never miss your budget requirements. Before starting any furnace repair work, I will thoroughly inspect your heating system and document the necessary repairs along with the costs. Then, I'll discuss the repairs with you to get your approval before proceeding.
I constantly assess my service technicians' diagnostic procedures and communication skills by making follow-up calls to customers and getting their feedback. This helps me identify areas for improvement and communicate the results with my service techs so that you can get consistent, high-quality service.
In addition, every morning, I meet with our staff to review all appointments and ensure that they're fully prepared before they head out on service calls. I also check that they're stocked with the proper replacement parts and aware of their time schedules. This process minimizes possible delays or issues and provides a seamless and hassle-free experience.
Our San Ramon team successfully installed a new central air heating system.
Energy efficient Goodman furnace unit.
Several factors must be considered when deciding to repair or replace your furnace. These details include the age of the equipment, its current condition, energy efficiency, and the cost of repairs versus a replacement unit. If your heating system constantly needs servicing, it is time to consider a new unit, as repairs can be costly and may only temporarily fix underlying issues. If your furnace is between 15 to 20 years old and the cost of repairs is approaching half the price of a new furnace, replacing it might be a better return on investment.
Replacing an old or frequently repaired furnace can offer significant energy savings. In fact, all the energy efficient central heating systems we have replaced in the greater San Ramon area have reduced their power bills by up to 20%. Besides the financial benefits, upgrading your furnace can reduce environmental impact and provide consistent, reliable heating.
While we specialize in furnace repair and maintenance in San Ramon, we understand that your home's heating needs often extend beyond your central heating system. Water heaters share many components and troubleshooting processes with furnaces, including gas line connections, thermostat systems, and ignition problems.
When our technicians encounter water heater issues during furnace service calls, we want to ensure our customers receive specialized care for these important appliances. For dedicated water heater repair, installation, or replacement services in the Contra Costa County area, we recommend Concord Water Heater Service. Their team specializes exclusively in water heater systems and can be reached at 925-338-9333 for prompt assistance.
Our furnace repair technician is shown here checking the color of the blue flame on the burners and the flame sensor.
Due to squealing noises from the blower motor belt, the tension is being adjusted.
Diagnosing and replacing a bad gas valve.
Cleaning the furnace burner ports during routine maintenance.
It is always a good practice to watch for any signs of wear and tear in your furnace, as it can help you identify and address issues early on. By doing so, you can make sure that your furnace operates smoothly and safely, saving you from any unwanted repair costs and helping you extend your furnace's life.
Thermostat Clicking: This sound is normal and indicates the thermostat is working correctly, signaling the furnace to start or stop heating.
Burner Clicking at Start: Another typical sound at the beginning of a heating cycle, indicating the ignition process is initiating.
Consistent Hum: A steady hum during operation is normal, suggesting the furnace runs smoothly.
Grinding Sounds: May suggest worn blower bearings. Regular maintenance can often prevent this issue.
Repetitive Clicking at Startup: This could signal problems with the flame sensor, ignitor, or gas valve, requiring professional attention.
Loud Bang: Often indicates delayed ignition, possibly due to dirt buildup. This situation may necessitate professional cleaning.
Squealing Noises: These sounds might occur if the blower belt slips or is damaged, indicating needing a check-up or replacement.
Short Cycling: If you notice that your furnace is heating your home for less than 10-15 minutes or it starts up and then turns off, it could be experiencing short cycling. The most common cause is a faulty flame sensor or ignition. Still, there are other less common issues, such as problems with air filters, the limit switch, thermostat miscommunications, or, in some cases, a bad gas valve.
For those interested in doing their own repairs, we have a detailed DIY guide on resolving short cycling in your furnace by cleaning the flame sensor. You can access the step-by-step instructions with images on our DIY Short Cycling Page to help you save money on a service call. Remember to follow safety precautions and call us if you encounter any problems.
To avoid these issues and make sure your furnace operates efficiently, consider the following maintenance tips:
Regular Filter Changes: A simple yet effective way to maintain your furnace's efficiency and prevent many common problems.
Annual Inspections: Arranging for professional evaluations of your furnace each year is crucial for identifying and mitigating minor issues before they develop into significant, costly repairs.
Keeping Vents Clear: Ensure that furniture or other objects do not block vents to maintain proper airflow.
Being attentive to the sounds your furnace makes and understanding what they signify can help you identify when it's time for servicing. Regular maintenance, including professional inspections and simple tasks like changing filters, plays a role in preventing issues and extending the life of your furnace.
Satisfied Customer Experiences.
"Pat, the service technician, provided us with excellent service. We had issues with our furnace, and he promptly came to our rescue. Pat diagnosed the problem on the first visit and narrowed the cause to two parts on the heat pump he could acquire under the original manufacturer's warranty. When he got the parts, he called, letting us know he was on his way to complete the repair. The furnace has been operating flawlessly since."
⭐⭐⭐⭐⭐Reviewed by: James Peterson
Date work performed: 10/19/2022 Stars: 5/5
Service Provided: Repaired an older furnace and gave it a tune-up.
Genuine Reviews from Happy Customers
"We had plans to replace our older furnace, but when the blower motor stopped working, which caused the AC to stop working, we had to replace it sooner than expected. Pat from AC Repair San Ramon installed our new furnace within two days. Even though Pat was willing to come out the same day, our schedule did not allow it. I made an excellent decision to use Pat, who was very knowledgeable and friendly, and I will recommend his services to others."
⭐⭐⭐⭐⭐Reviewed by: Randy Cummings
Date work performed: 11/12/2023 Stars: 5/5
Service Provided: Installed a replacement Goodman furnace.
Read More Reviews From Satisfied San Ramon Customers
